Basic water parameters

Basic water parameters – Introduction

In marine aquaristics, there is a specific group of basic water parameters we can refer to as basic. This article aims to provide a simplified overview of these fundamental water parameters. Additionally, it is intended for those who are just beginning their journey in marine aquaristics.

What are basic water parameters and what values should be maintained in a marine aquarium?

Below, I have listed the basic marine water parameters. These include their recommended levels that should be maintained in your aquarium.

KH – Carbonate hardness of water

KH is one of the key parameters of sea water. Appropriate carbonate hardness of water in a marine aquarium allows corals to build skeletons and color properly. A stable level of this parameter is extremely important. Some corals, especially corals from the acropora group, do not tolerate KH fluctuations. The parameter changes when hard corals are added to the aquarium. They consume KH by drawing it from the water. Therefore, if we add hard corals to the tank, we must constantly monitor this parameter and if it starts to drop – start dosing.

KH should usually be kept at the level of 7-8 dKh.

Ca – calcium

Calcium is essential for various processes in marine animals. It is necessary for building their skeletons.

Animals are not very susceptible to its changes, but its content should be kept at the level of 390-440 ppm.

Mg – magnesium 

Magnesium is also needed for building skeletons. It participates in the process of calcium absorption in marine animals.

As with calcium, animals are not clearly susceptible to fluctuations in this parameter, but we should try to keep it between 1250 and 1440 ppm.

PO₄ – phosphates

One of the parameters indicating whether we have a problem with the purity of the water. It is also necessary for many marine aquarium inhabitants to live.

We keep it in the range of 0.04-0.08 ppm, but if there is such a demand, its value can be higher – it all depends on the requirements of the animals we have in the aquarium.

NO3 – nitrates

The second parameter that determines the purity of water. It’s needed for the life of many marine animals. NO3 is the last parameter in the so-called nitrification cycle, in which ammonia is converted into nitrites and finally into nitrates.

We keep NO₃ in the range of 0.5 to 5, although higher levels can also be tolerated.

pH – an indicator of the condition of biology in the aquarium

I described the role of pH in detail. 

It’s worth taking a moment to read this article, as pH plays several important roles in the tank. Despite this, it is sometimes a parameter neglected by marine aquarists.

First and foremost, the optimal pH value for a reef tank ranges from 8.1 to 8.5.

Salinity

Salinity is actually a collection of minerals. They should be kept constant. In general, if you follow the rules of adding RO water and performing water changes correctly, the salinity should not change.

We keep the parameter at the level of 32-35 ppt.

Temperature 

The temperature should be constant. Fluctuant temperature means fluctuant salinity, and when salinity changes, along do all other water parameters.

We keep the water temperature at 24-27 °C / 75 – 80 °F

Check out this article to learn how often to test each parameter.

Summary

This short article gives a very general overview of the basic parameters. If you’re serious about setting up a marine aquarium, learning more about it is essential. This knowledge will be crucial to maintaining a successful tank. Each of the parameters has been extensively described on Reefpedia in the Chemistry and Biology section.

As usual, I invite you to talk on Social Reef, where in a dedicated thread we talk about basic water parameters.